MA-Series Positive Displacement Flow Meters


27/11/2015   804 views

Materials of Construction

  • Cast aluminumMeter and rotors:
  • Aluminum, Ni-ResistInternal components:
  • Seal materials:Buna-N
  • Bearings:Carbon

 Liquid Controls M-Series meters meet NTEP (NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications.

Design Features

Liquid Controls MA-Series rotary motion positive displacement (PD) meters offer the ultimate in measurement accuracy for custody transfer of LPG. LC meters incorporate a unique design, presenting minimal intrusion in a flowing stream of liquid, as well as minimal pressure drop through the meter. The LC meter consists of a housing in which three synchronized rotors turn with no metal-to-metal contact. Hydraulic sealing is accomplished by a stationary boundary layer of liquid, not by the wiping action of mechanical parts

  • Low pressure drop—will operate on gravity flow or pump pressure.
  • Sustained accuracy—no wear from metal-to-metal contact inside the measuring chamber means minimal deterioration in accuracy over time, fewer recalibrations, and longer service life. Meters conform to NIST and International Weights and Measures accuracy requirements.
  • Wide temperature range—products can be metered accurately from -40° F (-40° C) to 160° F     (71°C).
  • Wide viscosity range—LC meters can accurately meter products from less than 30 SSU (less than 1 centipoise) to 1,500,000 SSU (325,000 centipoise).
  • Maximum adaptability—right angle design with choice of stock or custom elbows/ fittings provides unequaled mounting flexibility to meet your installation requirements.
  • Rated to 350psi / 21 BAR.

Specifications

MA-Series Positive Displacement Flow Meters:
350psi / 21 BAR

Available ModelsSizeMaximum Nominal Flow Rate
MA4

1-1/2"

30 gpm / 113 L/min
MA5

2" or 1-1/2"

60 gpm / 227 L/min
MA7

2"

100 gpm / 380 L/min
MA15

3"

200 gpm / 757 L/min

Literature

LPG Application Brochure
Agriculture Application Brochure
Meter Bill of Materials
Engineering Documents
M/MA-series Installation and Operation Manual
MA4 Installation and Operation Manual
Product Overviews
Specification Sheets

Accessories
MA-Series meters are available with a selection of bolt-on strainers and air eliminators for the inlet side, and a selection of manual or solenoid actuated valves for the meter outlet. Mechanical and electronic registration equipment and printers are also available.

Theo nguồn: Liquid Controls- LC Meters