MS-Series Positive Displacement Flow Meters


27/11/2015   807 views

Materials of Construction

  • Steel or stainless steel (epoxy coated steel available for aviation and otherapplications)Meter housing:
     
  • Meter element and rotors:
    Cast aluminum (other metalurgies available including cast iron and stainless steel)
  • Aluminum, Ni-Resist, stainless steel, ironInternal components:
  • Seal materials
    Buna-N, Viton®, PTFE
  • Bearings
    Carbon, PTFE, Ni-Resist

 Liquid Controls MS-Series meters meet NTEP (NIST Handbook 44) and International Weights and Measures accuracy requirements as well as U.S. Military specifications.

Design Features

Liquid Controls steel-case MS-Series rotary motion positive displacement (PD) meters offer the ultimate in flow measurement accuracy for bulk custody transfer of petroleum products, aviation fuels, LPG, crude oil, petrochemicals, and a broad range of industrial liquids. MS-Series meters incorporate a unique design, presenting minimal intrusion in a flowing stream of liquid, as well as minimal pressure drop through the meter.

Liquid Controls MS-Series meters consist of an outer spherical steel-case shell with flanged inlet and outlet ports. The shell houses a traditional LC metering element that employs three rotating and synchronized rotors. These rotors accurately segment flow into a precise volume of liquid for each revolution, with no metal-to-metal contact inside the measuring chamber. Hydraulic sealing between the rotors and the measuring chamber wall is accomplished by a stationary boundary layer of liquid—not by the wiping action of mechanical parts—thereby ensuring sustained accuracy, long service life with minimal wear, and low pressure drop suitable for operation on gravity low or pump pressure.

All MS-Series spherical shells are constructed of steel or stainless steel. Epoxy coated versions are available for aviation applications. Metering elements are available in metallurgies and seal materials suitable for a wide range of petroleum, petrochemical, and industrial applications.

Specifications

MS-Series Positive Displacement Flow Meters:

 MSMSAAMSAMSBMSC
Pressure Rating         

150psi / 10.5 BAR

275psi / 19 BAR300psi / 21 BAR720psi / 50 BAR1,440psi / 100 BAR

 

Available ModelsSizeMaximum Nominal Flow Rate
MS, MSAA, MSA, MSB or MSC 7

2"

100 gpm / 380 L/min
MS, MSAA, MSA, MSB or MSC 15

3"

200 gpm / 760 L/min
MS, MSAA, MSA, MSB or MSC 30

3"

350 gpm / 1,325 L/min
MS or MSAA 40

3"

450 gpm / 1,700 L/min
MS, MSAA, MSA, MSB or MSC 75

4"

700 gpm / 2,650 L/min
MS, MSAA, MSA, MSB or MSC 120*

6" or 8"

1,000 gpm / 3,785 L/min

*Rated to 1,200gpm with 8" flanges

Literature

Terminal and Bulk Plant Application Brochure
MS-Series Meter Installation and Operation Manual 
Engineering Documents
Load Rack Application Brochure
Terminal Product Overview
MS-Series Specification Sheet

Contact us for more information

Accessories
MS-Series meters are available with a selection of bolt-on strainers and air eliminators for the inlet side, and a selection of manual or solenoid actuated valves for the meter outlet. Mechanical and electronic registration equipment and printers are also available.

Theo nguồn: Liquid Controls- LC Meters